Changing Your Digisuite Hardware - Matrox Digidesktop Installation Manual And User's Manual

22

Changing your DigiSuite hardware

Chapter 3, Software Installation and Monitor Setup
–
Choose
Start | Programs| Matrox DigiSuite Utilities| UnInstall
DigiUtils .
–
Run DigiUtils Setup again, select
.
Next
2
The program will restart your computer for the changes to take effect.
If you want to change your card set combination, such as by adding a new
DigiSuite card, you must first uninstall DigiUtils. Once you've installed
the new card set, run DigiUtils Setup again to update your current
installation. For details on the procedure for installing multiple card sets
and changing your hardware installation, refer to your DigiSuite
Installation Manual.
, then click
UnInstall DigiUtils