User Mode; Specifications - Canon NP6330 Service Manual

C. User Mode
To start User Mode, press
To select a mode, press the number (keypad) and the OK key in sequence.
To change the setting, press the Zoom (+) / Zoom (-) key and OK key.
• Press the clear key to clear a setting entered by mistake when making mode
settings.
The following modes may freely be made use of by the user:

1. Specifications

2. Adjustment/Cleaning
1. Specifications
Display Function
Changing the auto clear
time
Changing the auto
power-off time
Setting pre-heat mode
Turning on or off
cassette selection
Turning on or off manual
paper size registration
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
key.
Description
Use it to set the auto clear time
between 0 and 9 min in 1-min
increments. Setting it to 0 min
disables the function.
Use it to change the auto power-off
time between 10 and 120 min in
10-min increments.
Use it to specify a percentage at
which the power consumption is
reduced in pre-heat mode.
0%: no power saving
-10%: 10% saving.
-25%: 25% saving.
-50%: 50% saving.
Use it to turn on or off auto
cassette selection (APS)/auto
paper change (ACC) for each
cassette and multifeeder:
ON: Enable APS/ACC.
OFF: Disable APS/ACC.
Use it to specify whether paper
size should be stored at time of
setting paper or pressing the Copy
Start key for the multifeeder:
ON: At time of setting
paper.(multifeeder is
targeted for selection in the
APS/ACC and auto zoom
mode.)
OFF: At time of pressing Copy
Start key.
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
Default settings
2 min
60 min
-10%
ON
(Multifeeder is
OFF)
OFF
1-17