Attaching The Lower Feeding Assembly - Canon NP6330 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM

2. Attaching the Lower Feeding Assembly

When the lower feeding assembly is attached, follow the instructions below.
1) Make sure that a sheet is on the lower plate of the lower feeding assembly. If there
is no sheet on it, fix the sheet on the plate using a screwdriver.
2) Make sure that part of the plate of the lower feeding inlet assembly is on the upper
plate of the lower feeding assembly.
5-70
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Sheet
Figure 5-750
plate of the lower feeding
inlet assembly
Figure 5-751
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Screwdriver