Removing The Thermal Fuse - Canon NP6330 Service Manual

3. Removing the Thermal Fuse

1) Remove the copyboard glass.
2) Remove the screw
3) By pushing the middle of the No. 1 mirror mount
as indicated.
Note:
Whenever you must move the No. 1 mirror mount by hand, be sure to hold its
middle. Further, do not touch the surface of the lamp and the reflecting cover.
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
, and remove the attraction plate
Figure 4-304
Figure 4-305
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
.
, move the mirror mount until it is
4-27