Canon NP6330 Service Manual page 247

CHAPTER 6 FIXING SYSTEM
b. Points to Note When Installing the Heater
Do not touch the surface of the heater.
For the sub heater, one of the terminals of the lead wires
For the main heater, both sides are fastons.
<Main Heater>
The side with the longer lead wire
<Sub Heater>
The round terminal is toward the rear. The faston is toward the front.
Insert the main heater on the right side (pick-up side) and the sub heater on the left
side (delivery side) while viewing the fixing assembly from the front of the fixing
assembly.
6-26
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Figure 6-432
is toward the front of the copier.
Figure 6-433
Sub heater
(delivery side)
Figure 6-434
Main heater
(pick-up side)
Upper fixing roller
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
is a round terminal .