Blank Exposure Lamp Assembly; Removing The Blank Exposure Lamp Assembly - Canon NP6330 Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM
4) Remove the two screws
B. Blank Exposure Lamp Assembly

1. Removing the Blank Exposure Lamp Assembly

1) Remove the inside left cover.
2) Remove the developing assembly and drum unit.
3) Disconnect the two connectors
4) Remove the three screws
4-28
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
, and remove the thermal fuse
Figure 4-306
.
, and remove the harness retainer
Figure 4-307
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
.