Stringing The Guide Wire - Canon NP6330 Service Manual

4. Stringing the Guide Wire

The guide wire is 0.148 mm in diameter.
A
5. Adjusting the Height of the Charging Wire
The height of the charging wire may be adjusted by turning the screw located behind
the charging assembly. A full single turn of the screw raises or lowers the charging wire
by about 0.7 mm.
Corona Unit
Primary
Transfer
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
2 3 5
1 4 7
Figure 4-333
Height of Standard Position
A
B
Figure 4-334
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
6 9
8 10 11 13
A=10.6 ±0.3 mm
B=9.5 ±0.2 mm
12
B
4-41