Removing The Separation Roller - Canon NP6330 Service Manual

5. Removing the Separation Roller

1) Open the right door, and remove the two mounting screws
roller assembly support plate
pressure arm.
2) Remove the stop ring
Points to Note
When attaching the separation roller
is toward the front of the pedestal.
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
; then, remove the separation roller together with the
Figure 8-636
, and remove the separation roller
Figure 8-637
(rear)
Figure 8-638
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 PAPER DECK PEDESTAL
, make sure that the D-cut in the roller collar
(front of pedestal)
from the separation
.
8-33