Ipv6 Neighbour; Ipv6 Tspc Status - Draytek Vigor2130 Series User Manual

Hoplimit
Auto-refresh
3 . 8 . 5 I P v 6 N e
3 . 8 . 5 I P v 6 N e
IPv6 uses neighbor discovery protocol to find out neighbors on the same link.
Device
IP Address
MAC Address
State
Auto-refresh
3 . 8 . 6 I P v 6 T S
3 . 8 . 6 I P v 6 T S
IPv6 TSPC status web page could help you to diagnose the connection status of TSPC. TSPC
log contains some debug information from program.
If TSPC has not configured properly, the router will display the following page when the user
tries to connect through TSPC connection.
Vigor2130 Series User's Guide
i g h b o u r
i g h b o u r
P C S t a t u s
P C S t a t u s
he number of network segments on which the
Display t
packet is allowed to travel before discarded.
Check this box to enable an automatic refresh of the page
at regular intervals.
The interface name of the link where the neighbor is on.
The IPv6 address of the neighbor.
The link-layer address of the neighbor.
Possible states include:
incomplete - address resolution is in progress.
reachable - neighbor is reachable.
stale – neighbor(s) may be unreachable but not verified
until a packet is sent).
delay - neighbor may be unreachable and a packet was sent.
probe - neighbor may be unreachable and probes are sent
to verify the reachability.
Check this box to enable an automatic refresh of the page
at regular intervals.
91