Draytek Vigor2130 Series User Manual page 116

IP Address
Subnet Mask
Gateway IP Address
Primary DNS Server
Secondary DNS Server
Clone MAC Address
After finishing all the settings here, please click OK to activate them.
D D H H C C P P
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
your router automatically. It is not necessary for you to assign any setting,
Type the IP address.
Type the subnet mask.
Type the gateway IP address.
You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS Server.
If your ISP does not provide it, the router will automatically
apply default DNS Server IP address: 198.95.1.1 to this field.
You can specify secondary DNS server IP address here because
your ISP often provides you more than one DNS Server. If your
ISP does not provide it, the router will automatically apply
default secondary DNS Server IP address: 4.2.2.1 to this field.
It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
108
Vigor2130 Series User's Guide