Draytek Vigor2130 Series User Manual page 158

TCP/UDP Port
TCP/UDP Port Range
If you choose DSCP as QCE Type, you have to type value for it and specify traffic class
from Low, Normal, Medium and High.
If you choose ToS as QCE Type, you have to specify priority class from Low, Normal,
Medium and High.
Click Single or Range. If you select Range, you have to type
in the starting port number and the end porting number on
the boxes below.
Type in the starting port number and the end porting number
here if you choose Range as the type.
150
Vigor2130 Series User's Guide