Draytek Vigor2130 Series User Manual page 94

Password
Confirm Password
Tunnel Broker
Tunnel Mode
Auto-reconnect Delay
Keepalive
Keepalive_interval
Prefixlen
If_prefix
http://go6.net/4105/register.asp. It is suggested for you to
apply another username and password.
Type the password assigned with the user name.
Type the password again to make the confirmation.
Type the address for the tunnel broker IP, FQDN or an
optional port number.
IPv6-in-IPv4 Tunnel- Let the broker choose the tunnel
mode appropriate for the client.
IPv6-in-IPv4 (Native) - Request an IPv6 in IPv4 tunnel.
IPv6-in-IPv4 (NAT Traversal - Request an IPv6 in UDP
of IPv4 tunnel (for clients behind a NAT).
After passing the time set here, the client will retry to
connect in case of failure or keepalive timeout.
0 means not retry.
Yes – Keep the connection between TSPC and tunnel
broker always on. TSPC will send ping packet to make
sure the connection between both ends is normal.
No - The client will not send keepalives.
Type the time for the interval between two keepalive
messages transferring from the client to the broker.
Type the required prefix length for the client network.
Display LAN interface name.
interface that will be configured with the first 64 of
the received prefix from the broker and the router
advertisement daemon is started to advertise that
prefix on the if_prefix interface.
86
The name of the OS
Vigor2130 Series User's Guide