Mac Address Table - Draytek Vigor2130 Series User Manual

Tx Pause
Tx 64 Bytes
Tx 65-127 Bytes
Tx 128-255 Bytes
Tx 256-511 Bytes
Tx 512-1023 Bytes
Tx 1024- 1526 Bytes
Tx 1527 Bytes:
Tx Low
Tx Normal
Tx Medium
Tx High
Tx Drops
Tx lat/Exc.Coll.
Auto-refresh
Refresh
Clear
4 . 1 3 . 6 M A C A
4 . 1 3 . 6 M A C A
The MAC Address Table contains up to 8192 entries, and is sorted first by VLAN ID, then by
MAC address.
Each page shows up to 999 entries from the MAC table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the MAC Table. The first displayed will be the one with the lowest
VLAN ID and the lowest MAC address found in the MAC Table.
The Start from MAC address and VLAN input fields allow the user to select the starting
point in the MAC Table. Clicking the Refresh button will update the displayed table starting
from that or the closest next MAC Table match. In addition, the two input fields will assume
the value of the first displayed entry, allowing for continuous refresh with the same start
address.
The button >> will use the last entry of the currently displayed VLAN/MAC address pairs as a
basis for the next lookup. When the end is reached the text "no more entries" is shown in the
displayed table, use the l<< button to start over.
Vigor2130 Series User's Guide
d d r e s s T a b l e
d d r e s s T a b l e
Show the counting number of the transmitted pause packet.
Display the number of 64-byte frames in good and bad
packets transmitted.
Display the number of 65 ~ 127-byte frames in good and
bad packets transmitted.
Display the number of 128 ~ 255-byte frames in good and
bad packets transmitted.
Display the number of 256 ~ 511-byte frames in good and
bad packets transmitted.
Display the number of 512 ~ 1023-byte frames in good and
bad packets transmitted.
Display the number of 1024 ~ 1522-byt frames in good and
bad packets transmitted.
Display the number of 1527-byte frames in good and bad
packets transmitted.
Display the low queue counter of the packet transmitted.
Display the normal queue counter of the packet
transmitted.
Display the medium queue counter of the packet received.
Display the high queue counter of the packet received.
Display the number of frames dropped due to excessive
collision, late collision, or frame aging.
Display the number of Frames late collision or excessive
collision Error, which switch transmitted
Check it to enable auto-refresh function.
Click it to reload the page.
Click it to clear the counters for all ports.
209