Usb Application; Usb General Settings - Draytek Vigor2130 Series User Manual

CH
SSID
BSSID
Security
Signal
Scan
4 . 9 U S B A p p l
4 . 9 U S B A p p l
USB diskette can be regarded as an FTP server. By way of Vigor router, clients on LAN can
access, write and read data stored in USB diskette. After setting the configuration in USB
Application, you can type the IP address of the Vigor router and username/password created
in USB Application>>FTP User Setting on the FTP client software. Thus, the client can use
the FTP site (USB diskette) through Vigor router.
4 . 9 . 1 U S B G e
4 . 9 . 1 U S B G e
This page will determine the number of concurrent FTP connection and default charset for
FTP server. At present, the Vigor router can support USB diskette with versions of FAT16 and
FAT32 only. Therefore, before connecting the USB diskette into the Vigor router, please make
sure the memory format for the USB diskette is FAT16 or FAT32. It is recommended for you
to use FAT32 for viewing the filename completely (FAT16 cannot support long filename).
Vigor2130 Series User's Guide
i c a t i o n
i c a t i o n
n e r a l S e t t i n g s
n e r a l S e t t i n g s
Display the channel for the scanned AP.
Display the SSID of the scanned AP.
Display the MAC address of the scanned AP.
Display the encryption type of the scanned AP.
Display the strength (in percentage) of the signal of the
scanned AP.
It is used to discover all the connected AP. The results will
be shown on the box above this button.
177