Manual Record; Live Viewing - Honeywell HSVR-04 User Manual

Overview of Navigation and Controls

Manual Record

Live Viewing

Manual Record
28
After you have logged in, the system is in live viewing mode. You can see
the system date, time and channel name. If you want to change the system
date and time, you can refer to general settings (Main
MenuSettingGeneral). If you want to modify the channel name, refer
to the display settings (Main MenuSettingDisplay).
1 Recording status
2 Motion detection
Live audio will only be played under the single channel
Note
video display mode.
You need to have proper rights to implement the following
Note operations. Please make sure the HDD has been properly
installed.
Manual Record Menu
There are two ways for you to go to the manual record menu.

Right-click the mouse to select Record, or in the main menu proceed
to AdvancedManual Record.

In live viewing mode, click the record button in the front panel or the
record button in the remote control.
Manual record menu is shown in
Basic Operations
There are three modes: schedule/manual/stop. Please highlight icon"○" to
select the corresponding channel.
3 Video loss
4 Camera lock
Figure 4-5.