Auto Resume After Power Failure; Replace Button Battery; Manual Record; Live Viewing - Honeywell HSVR-16 User Manual

Auto Resume after Power Failure

The system can automatically backup video and resume previous working status
after power failure.

Replace Button Battery

Please make sure to use the same battery model if possible.
We recommend replace battery regularly (such as one-year) to guarantee system
time accuracy.

Manual Record

Live Viewing

After you logged in, the system is in live viewing mode. You can see system date,
time and channel name. If you want to change system date and time, you can refer
to general settings (Main Menu Setting General). If you want to modify the
channel name, refer to the display settings (Main Menu Setting Display).
Manual Record
Manual Record Menu
There are two ways for you to go to manual record menu.
•
•
Manual record menu is shown in
Basic Operations
There are three modes: schedule/manual/stop. Please highlight icon"○" to select
corresponding channel.
•
20
1 Recording status
2 Motion detection
Live audio will only be played under single channel video display
Note
mode.
You need to have proper rights to implement the following
Note operations. Please make sure the HDD has been properly
installed.
Right-click mouse or in the main menu, Advanced Manual Record.
In live viewing mode, click record button in the front panel or record button in
the remote control.
Manual: The highest priority. After being set to manual mode, all selected
channels will start regular (continuous) recording.
3 Video loss
4 Camera lock
Figure 4-5.
Honeywell