Table of Contents
Advertisement
Section 3: Operation
Slide bars in menus – The current value for a given parameter,
such as size or vertical stretch, appears to the left of its slide bar
icon (adjustment window). This number often expresses a
percentage, or it may have units associated with it (such as
pixels), depending on the specific option. Press L
down—both the number and the length of the bar change accordingly. Hold for continuous adjustment. Or
press E
to activate a slide bar text box for specific number entry via the keypad and then press E
NTER
save (or press E
"Direct" slide bars - For quick access, to Gamma, Brightness, and Contrast slide bars without traveling the
menu system. Press Gamma, Brightness, or Contrast to display the contrast slide bar.
Use the arrow keys to adjust a direct slide bar, or press E
then E
or L
NTER
E
XIT
to save and return to your presentation.
You can still adjust a direct slide bar as usual if the display is turned off (see OSD or Menu
NOTES: 1)
Preferences menu) — the slide bar just won't be visible.
five seconds.
Check boxes - Conditions are present if its adjacent check box
contains a checkmark. To toggle the check box, highlight and
press E
, or highlight and use R
NTER
L
A
K
EFT
RROW
EY
number to immediately toggle the check box.
Pull-down lists – To see a pull-down list of options available for a given parameter:
• Highlight the list and press E
• Enter the menu option number
Use the U
A
P
RROW
an option from the list.
1.
Serial (RS-232 IN) Options
2.
Serial (RS-232 OUT) Options
3.
Serial (RS-422) Options
Projector Address
4.
5.
Network Routing
6.
Ethernet Settings
7.
Broadcast Key
8.
Front IR Enable
9.
Back IR Enable
10.
Wired Keypad Enable
If you prefer to quickly scroll through a list without first pulling it down, highlight the option and use L
A
K
or R
RROW
EY
A
K
or R
RROW
EY
a pull-down list to cancel any change.
3-10
XIT
to cancel).
A
K
or R
EFT
RROW
EY
IGHT
IGHT
to uncheck. If a check box is numbered, enter its
NTER
; or
K
or D
A
EY
OWN
RROW
Communications
Separate
A
K
. Press E
IGHT
RROW
EY
A
K
IGHT
RROW
EY
to jump between pages in an extra long pull-down list.
/R
A
EFT
IGHT
RROW
NTER
and enter a specific number from the keypad,
A
K
to save (or E
RROW
EY
2)
A direct slide bar disappears if it is not used within
A
K
RROW
EY
to check and
K
to navigate up and down within the list. Press E
EY
NTER
when the desired choice appears.
White Uniformity
1.
Left Side
K
EY
to gradually adjust the setting up or
XIT
to cancel). When you are done, press
Edge Blending
1.
Blending Enable
1.
Separate
2.
RS-232 and RS-422 Joined
3.
RS-232 and Ethernet Joined
4.
All Joined
NOTES: 1)
Press E
2)
J Series 1000W & 1200W Setup Guide
020-100740-02 Rev. 1 (03-2014)
35.6
NTER
to
NTER
to choose
EFT
Press L
EFT
XIT
while in
Advertisement
Table of Contents
