Table of Contents
Advertisement
Function Key
IF WITHIN A NUMERIC FIELD IN A MENU: Use F
IF WITHIN A TEXT FIELD: Press F
between capital and lower case letters. Press F
insert or delete a character. Press F
IF WITHIN A PRESENTATION: Press F
numbers to enable a specific color or colors in the display (see right). For
example,
green data. Eliminating one or more colors can help with certain diagnostics
and setups, such as when accurately overlaying one image on top of another
from stacked projectors.
from numerous locations within the menu system.
Press F
followed by H
UNC
Brightness Uniformity settings. This will disable the features without
changing the settings associated with them.
Projector
Press P
ROJ
to access a specific projector within a group of projectors or to confirm if the local projector is
listening. The number in the "Enter Number" window indicates which projector is currently listening to
commands, and will match the projector number that has been defined in the Menu Preferences menu.
The P
ROJ
check box (read-only) shows whether or not a projector connected to a keypad is receiving keypadf
commands. A checkmark indicates that the projector is receiving keypad commands.
To control a specific projector with the keypad, press P
the projector you want to use. If you switch to a projector other than the one you are currently using, the
checkmark will disappear.
To broadcast to multiple projectors, press P
Keypad commands will then affect all projectors present.
projectors within the same wired configuration using the wired keypad exclusively, since there is only one
wired protocol available.
Communications Submenu.
Enter
Press E
NTER
to select a highlighted item, to toggle a check box, or to accept a parameter adjustment and return
to the previous menu or image.
Exit
Press E
XIT
to return to the previous level, such as the previous menu.
text editing boxes (including number editing of a slide bar value) or within pull-down lists. It acts as a
"cancel" in these cases.
Arrow Keys
Use the L
/R
EFT
IGHT
list without having to first scroll through options or navigate within a menu, pull-down list or text box.
J Series 1000W & 1200W Setup Guide
020-100740-02 Rev. 1 (03-2014)
UNC
followed by E
UNC
UNC
will display only red, and
NOTE:
Color enabling can also be implemented
ELP
to disable Keystone, Edge Blending and
ROJ
NOTE:
The address of the projector can be set in the Configuration Menu>
A
K
RROW
EY
to change a slide bar value or to select a different option within a pull-down
UNC
to enter a negative number.
followed by the U
A
P
RROW
followed by the L
UNC
NTER
to delete all characters.
followed by two numeric
will display
ROJ
and then enter the three-digit number assigned to
and then P
ROJ
again without entering a projector number.
NOTE:
There is no method of controlling a group of
Section 3: Operation
K
or D
A
EY
OWN
RROW
A
K
or R
EFT
RROW
EY
IGHT
6
0
6
1
6
2
6
3
6
4
6
5
6
6
6
7
6
9
F
IGURE
E
XIT
NOTE:
does not save changes within
K
EY
to convert
A
K
RROW
EY
to
= White (all colors)
= Red
= Green
= Blue
= Yellow
= Cyan
= Magenta
= White (all colors)
= Invert 3D input
3-3
3-7
Advertisement
Table of Contents
