Projector Components - Christie Griffyn Series Installation And Setup Manual

Projector components

Identify the main components of the projector.
The illustrations in this topic are for representation only and may not depict your projector model
exactly.
ID Component
A Projection lens
B Front IR
C Service door
D Display panel
E Keypad interface
F Communication and
input panel
G AC input
H Power on/off switch
I Rear IR
J LED and shutter LED
status indicator
K Mounting and rigging
holes
L Adjustable feet
M Bottom intake plates
Christie Griffyn Series Installation and Setup Guide
020-103314-12 Rev. 1 (07-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
A variety of lenses can be used with the projector. Available lenses are listed in the
Christie Griffyn Series Service Guide (P/N: 020-103329-XX).
Receives transmissions from the IR remote.
Provides access to the fold mirror, optical zoom/focus, and digital micromirror device
(DMD) convergence adjustments as well as the tools for Christie qualified
technicians.
Displays the projector menus and status.
Controls the projector.
Connects media sources to the Video Input panel.
For use with projector power cord.
Switch to power the projector on or off.
Receives transmissions from the IR remote.
Indicates power status and shutter status.
M12 x 1.75 holes for projector feet installation and for mounting and rigging points.
Four holes located on the top, and four located on the bottom.
Raise or lower these feet when positioning the projector. Make sure the projector is
level on all sides and the displayed image appears rectangular without any keystone.
Allows full airflow to the projector.
Installation and setup
27