Remote Control - Rinnai Symmetry RDV3600 Operation Manual

Remote control

Flame button
Fan button
(only if fan is installed)
Infra-red remote control. To operate, the remote control must be within 5 m and in the
direct line of sight of the Symmetry DV3600. Some flurorescent lights may interfere with the
transmission of the remote control signal. If this occurs try changing the position from which
you are operating the remote.
Avoid leaving the remote control in direct sunlight or near heat. Avoid dropping the remote
control or getting it wet.
Controller dimensions:
Batteries
Battery type:
If the remote control is not going to be used for a long period, remove batteries as this will
help avoid damage from leaking batteries.
to replace batteries, slide open the cover located on the back of the remote control. install
batteries ensuring that the correct polarity is observed.
Rinnai new Zealand
POWER
TIMER
H - 145 mm, W - 37 mm, D - 20 mm
4 x AAA batteries (do not mix old and new)
12
RDV3600 Operation Manual: 11743-A
01-10