Abnormal flame pattern
Each Rinnai Flame Fire has a distinct flame pattern. This should look the same every time you
start your fire, after an initial warm up period of approximately 20 minutes.
Abnormal flame performance and/or pattern can indicate a problem with your fire, such as
blocked gas injectors or artificial logs/burn media have shifted from when the fire was first
installed. There are some warning signs that could indicate a problem.
•
Unusual smell from the appliance
•
Continued difficulty or delay in establishing a flame
•
Flame appears either very short or very long
Normal
•
Flame only burns part way across the burner
•
Severe soot building up on the inside of the glass door
If any of the above signs occur, please call Rinnai to discuss.
Rinnai new Zealand
RDV3600 Operation Manual: 11743-A
15
Abnormal
01-10