Setting Value "3": Timer's Multi Speed Frequency Operation; Setting Val. 4: Timer's Accel./Decel. Link Mlt. Speed Freq. Operation - Panasonic VF100 Instruction Manual

Timer's multi speed frequency operation (setting value "3")
Timer's acceleration and deceleration link multi speed frequency operation function
(setting value "4")

[Setting value "3": timer's multi speed frequency operation]

During timer's multi speed operation, acceleration and deceleration time can be fixed to 8 speed
at most. Input run command, and then speed will automatically switch to the next speed after the
inverter operates within set time.
In the state that SW1~5 are set to "multi speed SW input function" in timer's multi speed, even if
signals are input during timer's multi speed operation, these signals are invalid and timer's multi
speed operation will continue.
Rotation direction can be set with parameter "P067: Rotation direction of timer's operation". Conti-
nuous times of timer's one cycle operation can be set with parameter "P068: Continuous times of
timer's operation". Operation mode and wait time for the timer operating from the end of one cycle
to the next cycle can be set with parameters "P069: Continuous mode of timer's operation" and
"P070: Continuous wait time of timer's operation". Each runtime for 1
be set with parameters "P071 ~P078: 1
[Setting value "4": timer's acceleration and deceleration link multi speed frequency operation function]
At most 8 speed and 4 acceleration and deceleration time can be linked for applying timer's multi
speed operation.
Timer's multi speed frequency operation function
P045=3
Rotation
direction
Freque-
(selected
ncy
position)
Forward run
1
st
1 speed
/reverse run
¢Ù
0 / 1
Forward run
2
2 nd speed
/reverse run
¢Ú
0 / 1
Forward run
3
3 rd speed
/reverse run
0 / 1
¢Û
Forward run
4
4 th speed
/reverse run
¢Ü
0 / 1
Forward run
5
5 th speed
/reverse run
0 / 1
¢Ý
Forward run
6
th
6 speed
/reverse run
0 / 1 ¢Þ
Forward run
7
7 th speed
/reverse run
0 / 1 ¢ß
Forward run
8
th
8 speed
/reverse run
¢à
0 / 1
st
speed ~8
Acceleration and
Runtime
deceleration time
st speed
runtime
T1
nd speed
runtime
T2
rd
speed
runtime
T3
1 st acceleration
time
th
speed
runtime
A1
T4
1 st deceleration
time
th speed
D1
runtime
T5
th
speed
runtime
T6
th
speed
runtime
T7
th
speed
runtime
T8
th
speed runtime".
Timer's acceleration and deceleration link multi
speed frequency operation function
P045=4
Rotation
Freque-
direction
Runtime
(selected
ncy
position)
Forward run
1 st
st
1 speed
/reverse run
runtime
¢Ù
0 / 1
Forward run
2 nd
2 nd speed
/reverse run
runtime
¢Ú
0 / 1
Forward run
rd
3
3 rd speed
/reverse run
runtime
0 / 1
¢Û
Forward run
th
4
4 th speed
/reverse run
runtime
¢Ü
0 / 1
Forward run
5 th
5 th speed
/reverse run
runtime
0 / 1
¢Ý
Forward run
th
6
th
6 speed
/reverse run
runtime
0 / 1 ¢Þ
Forward run
th
7
7 th speed
/reverse run
runtime
0 / 1 ¢ß
Forward run
th
8
th
8 speed
/reverse run
runtime
¢à
0 / 1
st speed to 8 th speed can
Acceleration and
deceleration time
speed 1 st acceleration and
deceleration time
T1 A1/D1
speed 2 nd acceleration and
deceleration time
T2 A2/D2
rd
speed 3 acceleration and
deceleration time
T3 A3/D3
th
speed 4 acceleration and
deceleration time
T4 A4/D4
speed
T5
speed
st
1 acceleration and
T6
deceleration time
speed
A1/D1
T7
speed
T8
95