Error Codes In Communication - Panasonic VF100 Instruction Manual

Table of Contents

Advertisement

12-11 Error Codes in Communication

Commands are ignored when an error occurred in communication.
Following error codes are returned to the host computer from the inverter in such cases.
[MEWTOCOL]
Code
Content
(ASCII)
21
NA CK error
27
Frame over error
40
BCC error
41
Format error
42
NOT support error
53
Busy error
60
Parameter error
61
Data error
62
Registration error
63
Mode error
[MOD-BUS(RTU)]
Error
Error name
code
01
Function code error
02
Address error
03
Data error
07
Mode error
08
Format error
A data error occurred during the communication.
(e.g.) Parity error, framing error
A received data is 118 bytes or more.
A transmission error occurred in the command data.
A command message does not match the transmission format.
(e.g.) The No. of command data is insufficient.
"#" or "transmission destination" is not contained in the message.
A command that is not supported was transmitted.
A command was transmitted to a transmission destination
that is not supported.
The previous command is being processed when a message
was received.
The function designated parameter has an incorrect code.
There is an error in the designation of the contact No., data
No. or data code format.
(e.g.) Set data is out of the designated range.
Number of registration exceeded when monitoring data.
When the command was transmitted, the operation mode
of the inverter was one that could not process the command.
•E Parameter data setting during the inverter is operating.
•E Parameter data setting during the inverter has an error.
An error in function code.
A function code that is not corresponding was sent.
An address that is not available was specified.
Set data is out of the designated range.
When a command was sent, the operation mode of the inverter
is the one that cannot process the command.
•E Parameter data setting during the inverter is operating.
•E Parameter data setting during the inverter has an error.
A command message does not match the transmission format.
Description
Description
195

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vf100

Table of Contents