Panasonic VF100 Instruction Manual page 147

[Continued from previous page]
MODE Press the MODE button.
Press the MODE button.
(If a password is set, it's necessary to input the
MODE
password. Refer to page 139.)
MODE
Press the MODE button.
Press the MODE button to select built-in memory
setting mode.
MODE
(If the mode is not displayed, set the copy function
4 to "E2P")
Press the UP button seven times and change
built-in memory parameter No. to E008.
Press the SET button to display built-in memory
parameter E008 data.
SET
(Main display will flicker.)
Press the UP button to set the displayed value
to "60.0".
(Main display will flicker.)
SET
Press the SET button to set the data.
Press the MODE button and enter the operation
MODE
preparation completed state.
Operation preparation
completed state
146
•E•E•E The normal stop state will be entered and the inverter
can be run.
(Operation status display mode)
.
.