Parts Identification; Part Name - Panasonic VF100 Instruction Manual

5. Parts Identification

5-1. Part Names
Operation panel unit
Warning label
Terminal cover 1
(Control circuit
terminal cover)
Control wire
lead-in hole
Main circuit wire
lead-in hole
Heat sink fins
Explanation of inside
of terminal cover
Control circuit
terminal block
(Relay output)
14
Mounting hole
MODE RUN
SET STOP
MIN. MAX.
PULL
Mounting hole
Ground terminal
Frame
Rating nameplate
* Check the rating nameplate to confirm
that the ordered product has been
delivered.
Terminal cover 2
(Main circuit terminal cover)
Cooling fan
Note: The cooling fan is mounted on the 1.5kW
or more. It is not mounted on the 0.75kW
capacity.
Note: This explanatory drawing shows the
state with the terminal cover removed.
During normal use, do not remove the
terminal cover.
Control circuit terminal block
(Signal input/output)
Main circuit terminal block