Applicable Communication Function In Inverter - Panasonic VF100 Instruction Manual

12-9. Applicable Communication Function in Inverter

"Monitor", "Control/command" and "Setting" functions are available depending on communications.
Register No.
Function
Relay No.
DT301
DT302
DT303
DT304
DT305
DT306
DT307
DT308
R309¡õ
R310¡õ
R311¡õ
R312¡õ
R313¡õ
DT314
DT315
DT316
DT317
DT320
DT321
DT322
DT323
DT237
DT238
R250¡õ
DT253
DT255
Setting
DT1¡«DT151
•E "¡õ" suffixed to the relay number means the specified position for BIT (hexadecimal 0 to F).
For the details on the functions of each BIT, refer to each functional descriptions.
•E Refer to page 194 for the explanation of the data type mentioned in the above table.
•E Accumulative operation time and accumulative fan operation time cannot be monitored by the
medium of communication.
Function name
Output frequency
Output current
Output voltage
Internal DC voltage
Setting frequency
Communication station No.
Timer runtimes
Alarm type
Control terminal state (input signal)
Control terminal state (output signal)
Operation status monitor
Operation control status monitor
Terminal function status monitor
PID setting value (SP)
PID target value (PV)
PID output value (MV)
Progress of automatic tuning progress
Fault display (latest)
Fault display (second to latest)
Fault display (third to latest)
Fault display (fourth to latest)
Frequency setting (without memory setting)
Frequency setting (with memory setting)
Operation control
Fault reset
Emergency stop command
Function parameter settings
Remarks
0.01 Hz unit (data type 3)
0.1 A unit (data type 2)
0.1V AC unit (data type 2)
0.1V DC unit (data type 2)
0.01 Hz unit (data type 3)
Indicates the communication station No. set currently.
Indicates continuous times of timer's one cycle operation.
Indicates details on alarm LED.
Contact data
Contact data
Contact data
Contact data
Contact data
0.01 % unit (data type 3)
0.01 % unit (data type 3)
0.01 % unit (data type 3)
0-5: During measuring 6: Measurement ends 7: Measurement suspends
Fault trip data
0.01 Hz unit (data type 3)
Contact data
H9696
H9696
Refer to page 189
183