Gps Position On A Vhf Radio; Radar Antenna (Usa Only); Personal Computer Connections - Standard Horizon CPF180i Owner's Manual

Gps chart plotters/ fish finder
Hide thumbs Also See for CPF180i:
Table of Contents

Advertisement

· DSC VHF Radio
· Depth Sounder, Speed Log, Wind Instrument, Autopilot etc.
· Radar (USA O
· Personal Computer
· AIS Receiver
· MOBILARM System
2.7

GPS POSITION ON A VHF RADIO

STANDARD HORIZON has pioneered Digital Selective Calling (DSC) on VHF radios.
Advancements in DSC have made it possible to show the coordinates of a vessel that has
transmitted a DSC Distress Call or even Polled the location of another vessel and shows
the position of that vessel on the display of STANDARD HORIZON VHFs. STANDARD
HORIZON has taken this feature one step further. If a CPF180i or CPF300i is connected
to a DSC capable VHF, the vessel in Distress or the Polled position of the vessel is shown
on the display of the GPS Chart Plotter, making it easy to navigate to the location of the
vessel. This is a great feature that could save someone's life or for anyone wanting to know
the position of another vessel.
Other DSC VHF Manufactures
GPS Chart Plotter
Green
Brown
Blue
* Some manufacturers of DSC VHF's are not capable of outputting NMEA DSC and DSE sentences to
the CPF180i or CPF300i. Refer to the Owner's Manual and confirm the VHF can output NMEA DSC
and DSE sentences.
Refer to VHF Digital Selective Calling Section for operation.
2.8

RADAR ANTENNA (USA ONLY)

Please refer to Par. "1.3 Radar Unit supplied by SI-TEX USA". The Radar antenna includes
the necessary electronics to deliver Radar information to a compatible STANDARD
HORIZON GPS Chart Plotter, and is supplied with mounting hardware kit, interconnection
cable and a Radar Junction Box.
Please refer to the Radar Installation Manual and Radar Operation Manual available at
www.standardhorizon.com.
2.9

PERSONAL COMPUTER CONNECTIONS

The GPS Chart Plotter can be connected to output Marks and Routes to many available PC
programs. To send or receive User Points the PC Program must be able to receive NMEA
WPL and RTE sentences. Refer to the table below for connection to a Serial DB9 connector.
Pin
PC DB9 connection
2
Receive
3
Transmit
5
Signal ground
Page 22
)
NLY
Description
NMEA Common Ground
NMEA Positive Output
NMEA Positive Input
Port1 connection
Brown
Blue
Green
VHF
Connect to NMEA Ground
Connect to NMEA Input
* Connect to NMEA Output (if available)
NOTE
CPF180i and CPF300i

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cpf300i

Table of Contents