Table of Contents
Advertisement
12.0.11
Chart Settings
Settings that control how the chart features will be shown on the Chart page of the GPS
Chart Plotter.
Lat/Lon Grid
: Turns the Latitude and Longitude grid lines on or off on the Chart page. See the figure below:
Chart Boundaries : Turns the Chart Boundaries On, Off or Auto. The Chart Boundaries are the "ticked" boxes surround
the coastline. Each box indicates an area where more detail is available. The Chart Boundaries
are only show when a C-MAP B
Plotter. See the pictures below:
Value-Added Data : Turns the Value-Added Data On or Off. The Value Added Data (VAD) is a collection of additional
cartographic objects which are not present on the original paper chart (from which the electronic
chart derives). These objects have been obtained from other sources and then merged to the
electronic charts in order to provide more information useful for the navigation. VAD object can
be any cartographic objects and it can be distinguished from the official-chart-objects from the
Quick Info. A dedicated icon is shown on the Quick Info window to indicate that the object queried
is a VAD. The same icon is also shown on the Full Info page and in addition the extended text
Value-Added Data is shown on the details of the VAD object. See the figure below:
Page 86
Figure 12.0.10 - Example of Roads and Points Of Interest
Y
J
NT
+
/MAX C-CARD is inserted into the GPS Chart
EPPESEN
CPF180i and CPF300i
Advertisement
Table of Contents
