the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight WINDOW SETUP and press [ENT] and press
[ENT] or move the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight NAVIGATION PAGE and press [ENT] and
press [ENT] or move the ShuttlePoint knob to the right.
5. Move the ShuttlePoint up or down to select COMPASS TAPE and press [ENT].
6. Press [CLR] or move the ShuttlePoint knob to the right until the Chart page is shown.
The COG heading is computed and supplied to the GPS Chart Plotter from the internal GPS or
external GPS.
12.3
HIGHWAY PAGE
Shows a 3D view of the vessel travelling through the water when navigating to a Destination
point, Mark or following a Route. Press [ZOOM IN] or [ZOOM OUT] to change the highway
scale.
12.4
CELESTIAL PAGE
The Celestial page contains Tide information critical for safe navigation. This page is also
useful for boaters that are concerned about the height of the water under a bridge or by
fisherman that wish to know the Tide and moon phase of a specific date.
12.4.0 Changing date
1. Press [ENT] and a popup window will be shown.
2. Moving the ShuttlePoint knob up or down changes the digits and left and right selects
the month, day and year.
3. Press [CLR] to exit and view the information.
CPF180i and CPF300i
NOTE
Figure 12.3 - Highway page
Page 89