Connecting The Gps Chartplotters To The Ff520 - Standard Horizon FF520 Owner's Manual

2.1 CONNECTIONS
2.2

CONNECTING THE GPS CHARTPLOTTERS TO THE FF520

CP155C and CP1000C connections to FF520
1. If the power/data cable is plugged into the CP155C or CP1000C, remove it.
2. Route the cable from the FF520 to the GPS Chart plotters location. Note the "Tee" cable
can be cut to run the cable, but care must be taken to ensure the cable is joined together
and sealed from moisture.
3. Plug in the "Tee" connector into the GPS Chart plotter DC/Data connector.
4. Plug in the power data cable into the "Tee" connector.
Page 10
Figure 2.1 - The FF520
Figure 2.2 - CP155C Connection
Figure 2.2a - CP1000C Connection
FF520