Table of Contents
Advertisement
1. After a Mark is created on the CPF180i press [ENT], move the ShuttlePoint knob to
highlight EDIT and press [ENT]. On the CPF300i press [E
window.
2. The Mark Icon is selected, press [ENT]. A popup window appears:
3. Move the ShuttlePoint knob to select the desired Mark Icon, when finished press [ENT].
4. Move the ShuttlePoint knob to the right to select the Mark Name. Press [ENT] and the
first digit in the name will be highlighted.
5. Move the ShuttlePoint knob up or down to select the first character.
6. Move the ShuttlePoint knob to the right to select the next character.
7. Repeat steps 4 and 5 until the Mark Name is shown. Press [ENT].
8. Move the ShuttlePoint knob to the right to select the Lat/Lon and press [ENT].
9. Move the ShuttlePoint knob up or down to select the first character.
10. Move the ShuttlePoint knob to the right to select the next character.
11. Repeat steps 9 and 10 until the desired position is shown. Press [ENT] and [CLR] to
store the Mark.
7.1.0
Deleting a Mark or Waypoint
1. Move the ShuttlePoint knob over the Mark or Waypoint to delete.
2. On the CPF180i press [ENT], move the ShuttlePoint knob to highlight DELETE and
press [ENT]. On the CPF300i press [D
deleting the point.
3. Move the ShuttlePoint knob to highlight YES and press [ENT].
7.1.1
Moving Mark or Waypoint
1. Move the ShuttlePoint knob over the Mark or Waypoint you want to move.
2. On the CPF180i press [ENT], move the ShuttlePoint knob to highlight MOVE and press
[ENT]. On the CPF300i, press [M
3. Use the ShuttlePoint knob to move the cursor. A dotted line, connecting the previous
Waypoint position to the new position, is shown:
Page 60
Figure 7.1 - Mark Editing
Figure 7.1a - Mark Icons
]. A popup window will be shown to confirm
ELETE
].
OVE
] to show the Edit popup
DIT
CPF180i and CPF300i
Advertisement
Table of Contents
