Table of Contents
Advertisement
12.0.0 CPF300i: F
When Dual Chart is selected, you will notice one of the chart windows will have a red border
around it. This red border indicates which chart window the GPS Chart Plotter has the focus
on, meaning if the ShuttlePoint knob is moved the cursor on chart window will move. The
focus may be changed to the other chart window with the procedure below:
1. Press any Soft Key. The Soft Key labels appear on the bottom of the screen. A [F
Soft Key will be shown.
2. Press [Focus]. A popup window appears where the active focus window label is
highlighted.
Figure 12.0.0a - Example of Dual Chart page with focus window shown
3. Move the ShuttlePoint knob up and down to highlight the desired item and press [ENT].
The red border is moved to the focused window.
It is possible to change the focus by pressing and holding [FIND] for 2 seconds (in place of 1 and
2 steps in the above procedure).
12.0.1 CPF180i: Change Focus on Dual Chart page
When Dual Chart is selected, you will notice one of the chart windows will have a red border
around it. This red border indicates which chart window the GPS Chart Plotter has the focus
on, meaning if the ShuttlePoint knob is moved the cursor on chart window will move.
The focus may be changed to the other chart window with the following procedure:
1. Press and hold [FIND] for 2 seconds. The "red" border around the window is moved from
active window to the other.
Repeat the step 1. to move the focus from a window to another.
Page 80
Soft Key on Dual Chart page
OCUS
Figure 12.0.0 - Example of Dual Chart page with [F
OCUS
NOTE
] shown
CPF180i and CPF300i
]
OCUS
Advertisement
Table of Contents
