Table of Contents
Advertisement
8.
MAN OVER BOARD (MOB) FUNCTION
During navigation, the "MOB" feature provides a one-touch method of storing a location,
such as a point were a crew member fell overboard. In this mode, the CPF180i or CPF300i
places a MOB point on the Chart page and all the navigation data shown is related to
navigating back to this point, allowing you to retrace your path to the MOB point efficiently.
8.0
PLACING A MOB POINT
1. On the Chart page, press [MOB] to start navigating back to the point.
2. You will notice a MOB Mark will be on the Chart page and all navigation is referring back
to this point.
3. On the CPF300i: if the cursor is moved over the MOB Icon, the popup windows over Soft
Keys will be shown allowing quick access to the Highway or Navigation page, or to Route
Check.
4. To stop navigation to the MOB point, press [GOTO], select STOP and press [ENT].
8.1
DELETING A MOB POINT
1. Move the ShuttlePoint knob until the cursor is over the top of the MOB icon.
2. On the CPF180i press [ENT], move the ShuttlePoint knob to highlight DELETE and
press [ENT]. On the CPF300i press [D
deleting the MOB point.
3. Move the ShuttlePoint knob to highlight YES and press [ENT].
CPF180i and CPF300i
Figure 8.0 - MOB point
], a popup window will be shown to confirm
ELETE
Figure 8.1 - Deleting MOB point
Page 65
Advertisement
Table of Contents
