Table of Contents
Advertisement
17.2.3 200kHz and 50kHz Fish/Chart pages
Selects the GPS Chart Plotter display to show the Chart page on the left half of the screen
and the Fish Finder on the right half of the screen. 200kHz or 50kHz Fish Finder can be
selected on the right half of the display.
With the focus on the Chart page the cursor may be moved and all chart menus can be
selected. When focus is on the Fish Finder window the Variable Range Marker can be
moved to see the depths of targets and Fish Finder menus can be accessed.
CPF180i: Focus on Fish/Chart page
When the Fish/Chart page has been selected please follow the procedure below to place
the focus on the Chart page or on the Fish Finder window:
1. Press and hold [FIND] for 2 seconds: a popup window appears where the active focus
window label is highlighted.
2. Move the ShuttlePoint knob up and down and press [ENT]. The focus is changed.
CPF300i: Focus Soft Key on Fish/Chart page
When the Fish/Chart page has been selected please follow the procedure below to place
the focus on the Chart or Fish Finder window:
1. Press one of the Soft Keys under the display. The Soft Key labels appear on the bottom
of the screen. A [F
2. Press [F
] to show the Focus popup window, where the active focus window label
OCUS
is highlighted.
3. Select CHART or FISH FINDER using the ShuttlePoint knob and press [ENT].
Page 118
Figure 17.2.2 - Zoom Full page
Figure 17.2.3 - Fish/Chart page
] Soft Key will be shown.
OCUS
CPF180i and CPF300i
Advertisement
Table of Contents
