3.13
DIC slider
Use together with the polarizer and analyzer sliders for episcopic DIC microscopy.
Sliding limit groove
Prism position
indication (A/B)
3.13.1 Attaching (removing) the DIC slider
Use a hexagonal screwdriver to loosen the DIC slider limit screw on the revolving
nosepiece.
Insert the DIC slider into the slot on the revolving nosepiece and screw in the DIC slider limit
screw.
When removing the DIC slider from the revolving nosepiece, first fully loosen the DIC slider
limit screw using a hexagonal screwdriver, and then pull out the slider.
DIC slider limit screw
3.13.2 Placing/removing the DIC prism in/from the optical path
3 Operation of Each Part
Figure-30 DIC slider
Figure-31 DIC slider
Figure-32 DIC slider
25
IC Inspection Microscope ECLIPSE L200ND / L200N Instructions
Prism selection knob
Prism movement knob
Push in:
The DIC prism is in
the optical path.