Changing The Illumination - Nikon ECLIPSE L200ND / ECLIPSE L200N Instructions Manual

3.7

Changing the illumination

You can change illumination with the selection lever on the arm. To change illumination,
push/pull the dark-field/bright-field/fluorescent selection lever for the L200ND or the
dark-field/bright-field selection lever for the L200N.
For fluorescent illumination on the L200ND, attach the filter block inside the microscope arm.
(See "4.9 Installing the filter block (for fluorescent illumination only)".)
FL Fully push in.
BF Pull out to the next
click-stop position.
DF Fully pull out.
3 Operation of Each Part
Figure-21 Changing the illumination
Table-4 Changing the illumination
Lever position
19
IC Inspection Microscope ECLIPSE L200ND / L200N Instructions
Dark-field/bright-field/fluorescent
selection lever (for L200ND only)
(Dark-field/bright-field selection
lever provided for the L200N)
Type of illumination
Fluorescent illumination
(for L200ND only)
* only when the filter block is
attached
Bright-field illumination
Dark-field illumination