Episcopic Fluorescent Microscopy (For L200Nd Only) - Nikon ECLIPSE L200ND / ECLIPSE L200N Instructions Manual

2.5

Episcopic fluorescent microscopy (for L200ND only)

1.
Attach the filter block for the desired excitation method.
--------------------------------------------
2.
Observe the sample by following the steps for the episcopic bright-field microscopy.
---------------------------------------------------------------------
3.
Perform the episcopic fluorescent microscopy.
Adjust brightness
with the brightness
control dial.
4.
After episopic fluorescent microscopy, return to bright-field microscopy, if required.
Adjust brightness
with the brightness
control dial.
2 Microscopy
See "4.9 Installing the filter block (for fluorescent illumination only)"
Adjust brightness with the ND filters.
Fully open the aperture diaphragm.
Adjust brightness with the ND filters.
9
IC Inspection Microscope ECLIPSE L200ND / L200N Instructions
See "2.1 Episcopic bright-field microscopy"
Press to the limit to place the
filter block in the optical path.
Pull to the next click-stop
position for BF (bright-field).
Adjust the size of the aperture
diaphragm.