Programming A Channel Name - Icom ic-U80 Instruction Manual

■ Programming a channel name

Each memory channel can be programmed with an alphanu-
meric name for easy recognition and can be displayed inde-
pendently by channel. Up to five characters can be used for
a channel name.
q While holding down [p] and [q],
turn ON the power to enter the Initial
Set mode.
w Push [p] or [q] to select the chan-
nel name display item. (dSP)
e Rotate [VOL] to select the channel
name display type,
"dSP.nm."
r Push [# ENT] to exit the Initial Set
mode.
t Push [VFO/MR/CALL] one or more
times to select the memory mode.
• Select the Call channel to program a
Call channel name.
y Push [p] or [q] to select a desired channel.
u Push [FUNC](M), and then [SET](8) to enter the channel
name programming mode.
• A cursor blinks for the first character.
i Rotate [VOL] to select a desired character.
• The selected character blinks.
• Push [p] to move the cursor right, push [q] to move the cur-
sor left.
[VOL]
o Repeat step i until the desired channel name is pro-
grammed.
!0 Push [# ENT] to exit the programming mode.
D Usable characters
(A) (b) (C)
(n) (O) (P)
(1) (2) (3)
( + ) ( - ) ( = )
MEMORY/CALL OPERATION
(d) (E) (F) (G) (H) ( I ) (J)
(q) (R) (S) (t) (U) (V) (W)
(4) (5) (6) (7) (8) (9) (0)
∗ / :
( ( ) ( ) ) (Space)
( ) ( ) ( )
6
1
2
3
4
5
6
7
8
9
10
11
12
13
(k) (L) (m)
14
15
(X) (y) (Z)
16
17
18
19
29