Channel Name Programming; Memory Transfers - Icom IC-V82-T Instruction Manual

■ Channel name programming

qSelect a "Channel Name Indication" type in
(p. 65).
MODE
wPush [C•
] to select memory
MR
mode, if necessary.
ePush [A•
], then push [8•
FUNC
to enter into the channel name
programming mode.
• The character to be edited blinks.
rRotate [VOL] to select a charac-
ter.
tPush [Y Y ] to move the cursor to right, [Z Z ] to move the cur-
sor to left.
• Up to 5 characters can be used for channel name.
• Usable characters are A–Z, 0–9, "space," +, –, =, ✱, /, [, ] and :.
y Push [✱•
] (or [D•
ENT CLR
channel name programming mode.
INITIAL SET
[VOL]
]
SET
C
MR
A
FUNC
ENT
8
SET
]) to set the name and exit the
MEMORY/CALL OPERATION

■ Memory transfers

This function transfers a memory channel's contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency etc.
D Memory/call ➾ VFO
qSelect the memory (call) channel
to be transferred:
➥ Push [C•
] (or [B•
MR CALL
select memory (call) mode.
➥ Push [Y Y ] or [Z Z ] to select the
memory channel.
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the
memory channel. (pgs. 14, 65)
wPush [A•
], then push and
FUNC
hold [C• ] for 1 sec. to transfer
MR
the selected memory contents to
the VFO.
• VFO mode is selected automatically.
6
]) to
C
MR
B
CALL
A
FUNC
6
23