[Vol] Function Assignment; Basic Operation - Icom ic-U80 Instruction Manual

4

BASIC OPERATION

■ [VOL] function assignment

[VOL] can be used as a tuning control instead of [p] and
[q], to suit your preference. However, when [VOL] functions
as a tuning control, [p] and [q] function as volume controls.
q While holding down both [p] and [q], turn ON the power
to enter the Initial Set mode.
w Push [p] or [q] to select the dial assignment item. (tOP)
e Rotate [VOL] to select an option.
r Push [# ENT] to exit the Initial Set mode.
[VOL]
[VOL] and [p]/[q] function as described below, depend-
ing on the selected option.
Option [VOL]
tOP.VO Volume control
tOP.dI Tuning control
20
[VOL] functions as the volume control.
[VOL] functions as the tuning control.
[p]/[q]
Tuning controls
Volume controls