Memory Scan; Setting Skip Channels; Scan Resume Setting - Icom ic-U80 Instruction Manual

■ Memory Scan

A memory scan repeatedly scans memory channels, except
those set as Skip channels.
q Push [VFO/MR/CALL] one or more times to select the
memory mode.
• "X" appears.
w Push [FUNC](M ), then
[SCAN](5) to start the scan.
• To change the scan direction,
push [p] or [q].
e To cancel the scan, push any key except [
[MONI] or [FUNC](M).

■ Setting Skip channels

In order to speed up the scan rate, you can set the memory
channels you don't want to scan as Skip channels.
q Select a memory channel to be skipped.
Push [VFO/MR/CALL] one or more times to select the
memory mode, and then push [p] or [q] to select a de-
sired channel.
w Push [FUNC](M), and then
[SKIP](6) to turn the skip set-
ting ON or OFF.
• "SKIP" appears when the chan-
nel is set as a Skip channel.
], [p]/[q],
Appears

■ Scan resume setting

When a signal is received during a scan, the scan resume
setting determines what action the transceiver takes. The
transceiver has two scan resume settings, as described
below. Select the one which best suits your needs in the Set
mode.
q Push [FUNC](M), and then [SET](8) to enter the Set mode.
w Push [p] or [q] to select the scan pause timer item (SCt,
or SCP).
e Rotate [VOL] to select a desired scan pause option.
• Pause scan
The scan pauses until the received signal disappears, and
then resumes after 2 seconds.
• Timer scan
The scan pauses for the selected 5 seconds, 10 seconds
or 15 seconds, and then resumes.
r Push [# ENT] to exit the Set mode.
[VOL]
SCAN OPERATION
Pause scan
Timer scan (15 second)
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
31