Programming A Channel Name; Basic Operation - Icom ic-80fx Instruction Manual

■ Programming a channel name

An alphanumeric name can be programmed into each chan-
nel for easy recognition. The programmed channel name is
displayed instead of the channel number. Up to fi ve charac-
ters can be used for a channel name.
q Push [ ] or [ ] to select the chan-
nel to program a name.
w Push [FUNC](M), and then hold
down [MN.W](# ENT) for 1 second
to enter the channel name program-
ming mode.
• A cursor blinks for the fi rst character.
e Rotate [VOL] to select a character.
• The selected character blinks.
• Push [ ] to move the cursor right, push [ ] to move the cur-
sor left.
r Repeat step e until the channel name is programmed.
t Push [# ENT](MN.W) to exit the programming mode.
[VOL] D Usable characters
(A) (b) (C)
(n) (O) (P)
(1) (2) (3)
( + ) ( - ) ( = )

BASIC OPERATION

(d) (E) (F) (G) (H) ( I ) (J)
(q) (R) (S) (t) (U) (V) (W)
(4) (5) (6) (7) (8) (9) (0)
∗
/ :
( ) ( ) ( ( ) ( ) ) ( ) (Space)
4
1
2
3
4
5
6
7
(k) (L) (m)
8
(X) (y) (Z)
9
10
11
12
13
14
15
16
17
18
19
18