Lockout Function - Icom ic-U80 Instruction Manual

5
REPEATER OPERATION

■ Lockout function

The Lockout function helps prevent interference to other sta-
tions by inhibiting transmitting when the channel is busy.
The function can be set in the Initial Set mode.
q While holding down [p] and [q], turn ON the power to
enter the Initial Set mode.
w Push [p] or [q] to select the lockout item. (RLO)
e Rotate [VOL] to set the lockout option to OFF, Repeater
Lockout, or Busy Lockout.
• "RLO.OF" : Allows transmitting, even if signals are received.
• "RLO.RP" : The Repeater Lockout function inhibits transmitting
when the channel is busy, except while receiving a
signal that includes a matched subaudible tone.
• "RLO.bU" : The Busy Lockout function inhibits transmitting
while receiving a signal.
r Push [# ENT] to exit the Initial Set mode.
24
[VOL]
The repeater lockout function
is ON.