Icom ic-U80 Instruction Manual page 11

[3] • [T.SCAN](3)
➥ Numeric input and sends DTMF code: '3'
➥ After pushing [FUNC](M), starts a tone scan. (p.
35)
[4] • [DUP](4)
➥ Numeric input and sends DTMF code: '4'
➥ After pushing [FUNC](M), selects minus duplex,
plus duplex, or simplex operation. (p. 22)
[5] • [SCAN](5)
➥ Numeric input and sends DTMF code: '5'
➥ After pushing [FUNC](M), starts a scan. (pp. 30,
31)
[6] • [SKIP](6)
➥ Numeric input and sends DTMF code: '6'
➥ After pushing [FUNC](M), sets or cancels the
Memory Skip scan setting. (p. 31)
[7] • [PRIO](7)
➥ Numeric input and sends DTMF code: '7'
➥ After pushing [FUNC](M), starts the Priority watch.
(p. 32)
[8] • [SET](8)
➥ Numeric input and sends DTMF code: '8'
➥ After pushing [FUNC](M), enters the Set mode.
(p. 39)
PANEL DESCRIPTION
[9] • [H/M/L](9)
➥ Numeric input and sends DTMF code: '9'
➥ After pushing [FUNC](M), sets the output power
to High, Mid or Low. (p. 19)
[0] • [DTMF-M](0)
➥ Numeric input and sends DTMF code: '0'
➥ After pushing [FUNC](M), enters the DTMF mem-
ory mode. (p. 36)
[M] • [FUNC](M)
➥ Sends DTMF code: 'M (indication: E)'
➥ Push to access the second function of other
keys.
[# ENT] • [ ](ENT)
➥ Sends DTMF code: '# (indication: F)'
➥ After entering a frequency, stores it. (p. 17)
➥ Push to exit the Set mode or Initial Set mode. (pp.
39, 44)
➥ After pushing [FUNC](M), hold down for 1 second
to turn the Key Lock function ON or OFF (p. 18)
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
5