Step 2 Selecting The Features - Fuji Xerox ApeosPort-V 5070 User Manual

5 Scan
1
Open the document cover.
Important • Ensure that the touch screen is active, and
2
Load the document face down, and align it
against the top left corner of the document
glass.
3
Close the document cover.

Step 2 Selecting the Features

5
On the Services Home screen, you can select the following Scan services: [E-mail], [Store to
Folder], [Network Scanning], [Scan to PC], [Store to USB], [Store & Send Link], and [Store to
WSD]. You can select features for each service.
Note
E-mail
Scans a document and sends the scanned data as an e-mail attachment after converting
the data to TIFF, JPEG, PDF, DocuWorks, or XML Paper Specification (XPS).
Store to Folder
Scans a document and saves the scanned data in a folder on the machine.
You need to create a folder in advance. For information on how to create a folder, refer to "5 Tools" > "Setup" > "Create
Folder" in the Administrator Guide.
Network Scanning
Scans a document using a job template created on CentreWare Internet Services.
For information on how to create a job template, refer to the help of CentreWare Internet Services.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
Scan to PC
Scans a document and sends the scanned data to a network computer via the FTP or SMB
protocol.
264
then load a document. Otherwise, the
machine may not properly detect the
document size.
• WSD stands for Web Services on Devices.
• The features to be displayed on the screen depend on the configuration of your machine.
• When the Accounting feature is enabled, a user ID and passcode may be required. Ask your system
administrator for the user ID and passcode.
• To use the Scan services, network settings are required. For information on the network settings,
refer to "9 Scanner Environment Settings" in the Administrator Guide.
connect to the Internet. The communication fee shall be borne by you.