Fuji Xerox ApeosPort-V 5070 User Manual page 253

1
Select an address number or group dial number to which a remote relay broadcast is
registered, and press the <Start> button.
DTMF Method
The following two types are available in the DTMF method: Auto Send and Manual Send.
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the
Administrator Guide.
For information on the setting items to be registered in a primary relay station and a secondary relay station, refer to the
documentations provided with them.
Note
Auto Send (Transmitting without picking up the receiver)
1
Select the keyboard button to display the keyboard on the touch screen and enter in the
following format.
The 1st relay station
telephone number
Password
A pre-registered 2-digit number
Note
Relay Station ID
The last two digits of the initiating station address number registered at the primary relay
station
Address Number
The address number for the secondary relay station registered at the primary relay
station
You can register the above dialing format in an address number to send using the address number. For information on how
to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
2
Select [+ Add] to perform Multiple Relay Broadcast.
Manual Send (Transmitting with picking up the receiver or on-hook)
1
Select the [More Options] tab to display the [More Options] screen.
2
Pick up the telephone receiver, or select [On-
hook (Manual Send/Receive)].
3
Select [Manual Send] from the drop-down
menu.
• You can specify any machine that supports our DTMF method feature.
Password
• By default, no password is set. For setting a password, contact our Customer Support Center. If a
password is not set, you do not need to enter one.
Relay
Address
station ID
number
Broadcast
4
253