1 Before Using the Machine
Front
°
10
1
Others
24
Do not incline the product at more than 10 degree angle. Otherwise, it may
fall over and cause injuries.
Back
Front
Back
10
Always lock the wheels of this product after installation. Otherwise, it may
fall over or slide and cause injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that
Fuji Xerox supplies. Otherwise, it may cause some defects.
To keep this product in a good performance and condition, always use it in
the following environment:
Temperature: 10 - 32°C
Humidity: 15 - 85%
When the product is left in a chilly room and the room is rapidly warmed up
by heater, dew condensation may form inside the product and cause a
partial deletion on printing.
Left
Left
Right
°
°
10
Right
°
10