Fuji Xerox ApeosPort-V 5070 User Manual page 363

1
Select a job flow sheet to link to.
Important • Selecting [Save] without selecting a job flow
sheet does not set a link. If the selected job
flow sheet is already linked, the link is
canceled.
Note • Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• Scroll the list by drag or flick operation to
switch the screen to be displayed. For
information on how to drag or flick, refer to "Touch Screen" (P.90).
• You can sort the list in ascending or descending order by selecting either [Name] or [Updated].
2
Select [Job Flow Settings].
3
Select [Create/Change Link].
4
Select any option.
Refresh
Displays the updated information.
Create
Displays the [Create New Job Flow Sheet]
screen.
For more information, refer to "5 Tools" > "Setup" > "Create Job Flow Sheet" > "Create New Job Flow Sheet" in the
Administrator Guide.
Edit/Delete
Displays the [Details] screen.
For more information, refer to "5 Tools" > "Setup" > "Create Job Flow Sheet" > "Edit/Delete" in the Administrator Guide.
Search by Name
Searches for job flows that partially match the entry. The machine searches through job flow
sheet names that were registered upon each job flow sheet creation. The entry can be up to
128 characters long.
For information on how to enter characters, refer to "Entering Text" (P.92).
Search by Keyword
Searches for job flows that fully match the entry. The machine searches through keywords
that were registered upon each job flow creation. The entry can be up to 12 characters long.
You can select from preset keywords if they have been registered in the System
Administration mode.
Configuring/Starting Job Flow
363
6