Remote Relay Broadcast (Performing Relay Broadcast To Remote Locations) - Fuji Xerox ApeosPort-V 5070 User Manual

4 Fax
When the relay station ID is set, the initiating station is notified of the results of a Relay
Broadcast.
When the relay station ID is "00" or "000", the initiating station is not notified of the
results of a Relay Broadcast.
Address Number
The address number assigned to the relay recipient
The following shows an example of F Code that indicates printing at the relay station,
notifying the initiating station (100) of the results, and performing Relay Broadcast to
relay recipients (200, 201, 202, and 203).
F Code example: 21100200201202203
5
If necessary, enter the password using the numeric keypad.

Remote Relay Broadcast (Performing Relay Broadcast to Remote Locations)

The Remote Relay Broadcast feature combines two or more Relay Broadcast operations and
use Broadcast Send.
This feature is more economical than Relay Broadcast in transmitting documents to
multiple remote machines.
4
Note
The following three methods are available in Remote Relay Broadcast:
Fax Signal Method
This method employs a Fuji Xerox proprietary communication procedure that is only for use
with specific machines that support the Relay Broadcast feature.
DTMF Method
G3 fax machines that support Manual Send can perform Remote Relay Broadcast for the
machine.
F Code Method
This method can be used among machines that support the F Code and the Relay Broadcast
features.
Fax Signal Method
Register the following information in the address numbers of initiating stations in advance.
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the
Administrator Guide.
Where
Initiating
Station
For information on the setting items to be registered in a primary relay station and a secondary relay station, refer to the
documentations provided with them.
252
• Multiple Relay Broadcast can be performed from a secondary relay station.
• For IP Fax (SIP), only Relay Broadcast with the F Code method is available.
Assign the relay station to an address number (0001 to 2000) to set up the Relay
Broadcast feature.
Register the last two digits of the address number of the initiating station (which
is already registered at a primary relay station) as a relay station ID.
Register the address numbers or group dial number of the secondary relay
stations (which are registered at a primary relay station) as broadcast recipients.
Contents