Fuji Xerox ApeosPort-V 5070 User Manual page 300

5 Scan
be opened with DocuWorks Ver. 4.0 or later.
Select [Open Password] to set a password.
Password (V5 or later)
Encrypts the file by the 128 bit AES method using a password. Files encrypted by this
method can be opened with DocuWorks Ver. 5.0 or later.
Select [Open Password] to set a password.
Password (V8 or later)
Encrypts the file by the 256 bit AES method using a password. Files encrypted by this
method can be opened with DocuWorks Ver. 8.0 or later.
Select [Open Password] to set a certificate.
Important • If you encrypt a file using a certificate without Basic Constraints, you cannot use DocuWorks Ver.
Note
5
Digital Certificate (V5 or later)
Encrypts the file by the 128 bit AES method using a certificate. Files encrypted by this
method can be opened with DocuWorks Ver. 5.0 or later.
Select [Certificate] to set a certificate.
Note
Digital Certificate (V8 or later)
Encrypts the file by the 256 bit AES method using a certificate. Files encrypted by this
method can be opened with DocuWorks Ver. 8.0 or later.
Select [Certificate] to set a certificate.
Note
Encryption Algorithm
Displays the encryption methods.
Restricted Operations
Select file operations to assign access privileges. When assigning access privileges, set [Full
Access Password].
Open Password
Displays the [DocuWorks Security - Open Password] screen.
If you select [On] and set a password, the file is encrypted. To open the file, the password is
required. The access privileges set in [Restricted Operations] are assigned.
You can enter a password with up to 32 characters.
Full Access Password
Displays the [DocuWorks - Full Access Password] screen.
If a password is set, the password is required to change the access privileges set in
[Restricted Operations].
300
5.0.1 and Ver. 6.0.1 to open the file. To use such certificates, use DocuWorks Ver. 5.0.2, or Ver. 6.0.2
or later.
• This feature is supported only by the ApeosPort series models.
• When you select [Full Access Password] or [Open Password] in [Digital Certificate (V4
Incompatible)], the same certificate name may be redundantly displayed in [Security Settings] of a
DocuWorks document to be generated, in the following conditions. However, this does not affect
the operation.
- When you created a job flow on the machine, the same certificate was selected redundantly.
- The certificate data was obtained from an LDAP server, and the same certificate was selected
redundantly.
• This feature is supported only by the ApeosPort series models.
• This feature is supported only by the ApeosPort series models.